Waterlogged full blocks in shipwrecks

What i found: I was playing on a server trying to clear out the water that was in a shipwreck when i saw water coming from what are classified as full blocks. (stripped wood and wood planks) (not Stairs, slabs, trapdoors and Fences which i know can be waterlogged)

What i expected to happen: i expected the Wood planks or stripped wood logs to not hold water even in shipwrecks because those two are classified as full blocks.

What happened: i found that both Wood planks and Stripped wood held water in a shipwreck that was naturally generated. as i was clearing out the water i saw water pour forth from a stripped wood log from the mast of the ship that i was working on. i went on and found that the same thing was happening with all of the wood plank types on that same shipwreck.

steps to reproduce:

1 find a shipwreck that is barely in the water in either survival or creative.

2 try to clear out the water from one of the masts by first surrounding the mast in sand as shown in one of the screenshots.

3 remove one block of sand that is right next to the mast. you will see water coming out of the stripped log.

4 craft up a empty bucket or grab one from the creative menu if you are in creative.

5 click on the stripped log that the water is coming from. you will wind up with a bucket of water.

this is likely the same bug that causes the water block to be in the same block as a full block of obsidian as noted in MCPE-94984

note: i made a video explaining the bug that will be on Youtube and i will link it here for reference.

YouTube link https://youtu.be/74NYyt09EJI